Tyros3
Reference Manual

6
Registration Memory
- Saving and Recalling Custom Panel Setups -

Contents
Disabling Recall of Specific Items (Freeze)	77
Calling Up Registration Memory Numbers in Order (Registration Sequence)	78
Confirming the Registration Sequence Setting in the Main Display	79
Saving the Registration Sequence Settings	79

Disabling Recall of Specific Items (Freeze)
Registration Memory lets you recall all the panel setups you made with a single button press. However, there may be times that you want certain items to remain the same, even when switching Registration Memory setups. For example, you may want to switch Voices or effect settings while keeping the same accompaniment Style. This is where the Freeze function comes in handy. It lets you maintain the settings of certain items and leave them unchanged, even when selecting other Registration Memory buttons.

1	Call up the operation display.
[FUNCTION] -> [E] REGIST SEQUENCE/FREEZE/VOICE SET -> TAB [LEFT][RIGHT] FREEZE

2	Determine the items to be "frozen."
Select the desired item by using the [2 UP DOWN] to [7 UP DOWN] buttons, then enter or remove the checkmark by using the [8 UP] (MARK ON)/[8 DOWN] (MARK OFF) buttons.

3	Press the [EXIT] button to exit from the operation display.

CAUTION
Settings in the REGISTRATION FREEZE display are automatically saved to the instrument when you exit from this display. However, if you turn the power off without exiting from this display, the settings will be lost.

4	Press the [FREEZE] button on the panel to turn the Freeze function on.

Calling Up Registration Memory Numbers in Order (Registration Sequence)
As convenient as the Registration Memory buttons are, there may be times during a performance when you want to quickly switch between settings-without having to take your hands from the keyboard. The convenient Registration Sequence function lets you call up the eight setups in any order you specify, by simply using the TAB [LEFT][RIGHT] buttons or the pedal as you play.

1	Select the desired Registration Memory bank to program a sequence.

2	Call up the operation display.
[FUNCTION] -> [E] REGIST SEQUENCE/FREEZE/VOICE SET -> TAB [LEFT][RIGHT] REGISTRATION SEQUENCE

3	If you intend to use a pedal to switch Registration Memory settings, specify here how the pedal will be used-to advance or to reverse through the sequence.
Use the [C] (REGIST plus PEDAL) button to select the pedal for advancing through the sequence.
Use the [D] (REGIST minus PEDAL) button to select the pedal for reversing through the sequence.

NOTE
If you assign the function to a pedal here, the other function set in the Foot Pedal display (page 109) becomes invalid. 

(Figure)
Indicates the name of the currently selected Registration Memory Bank.

4	Use the [E] (SEQUENCE END) button to determine how Registration Sequence behaves when reaching the end of the sequence.

STOP	Pressing the TAB [RIGHT] button or the "advance" pedal has no effect. The sequence is "stopped."
TOP	The sequence starts again at the beginning.
NEXT BANK	The sequence automatically moves to the beginning of the next Registration Memory Bank in the same folder.

5	Program the Sequence order, from left to right.
Press one of the REGISTRATION MEMORY [1] to [8] buttons on the panel, then press the [6 UP DOWN] (INSERT) button to input the number.

(Figure)
Indicates the Registration Memory numbers, in the order of the current Registration Sequence.

(Table)
[1 UP DOWN] to [4 UP DOWN]	CURSOR	Moves the cursor.
[5 UP DOWN]	REPLACE	Replaces the number at the cursor position with the currently selected Registration Memory number.
[6 UP DOWN]	INSERT	Inserts the number of the currently selected Registration Memory number before the cursor position.
[7 UP DOWN]	DELETE	Deletes the number at the cursor position.
[8 UP DOWN]	CLEAR	Deletes all numbers in the sequence.
(Table End)

6	Press the [F] button to turn the Registration Sequence function on.

7	Press the [EXIT] button to exit from the operation display. 

Confirming the Registration Sequence Setting in the Main Display
In the Main display, you can confirm whether the Registration Memory numbers are called up according to the sequence programmed above.

(Figure)
The Registration Sequence is indicated at the top right of the Main display, letting you confirm the currently selected number.

To shift the Registration Memory numbers, use the TAB [LEFT][RIGHT] buttons when the Main display is shown. When pedal operation has been set in step 3 on page 78, you can also use a pedal to select the Registration Memory numbers in order. The pedal can be used for Registration Sequence no matter which display is called up (except for the display in step 3 on page 78).
To return to the first Sequence, press the TAB [LEFT] and [RIGHT] buttons simultaneously when the Main display is shown. This cancels the currently selected Sequence number (the box indicator at the top right goes out). The first Sequence will be selected by pressing one of the TAB [LEFT][RIGHT] buttons or by pressing the pedal.

Saving the Registration Sequence Settings
The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your newly programmed Registration Sequence, save the current Registration Memory Bank file.

CAUTION
Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you've saved it with the Registration Memory Bank file.

1	Press the REGIST BANK [plus] and [minus] buttons simultaneously to call up the REGISTRATION BANK Selection display.

2	Press the [6 DOWN] button to save the Bank file.

This is the end of the file.